3236345
S3 or S4 cycling may be cause an error of RAID1 volume
Win7-64
3236354
Operating system crashes when scan for and attempt recovery of bad sectors w/ RAID0 volume
Win7-64
3236510
Attempting to Accelerate a hot-inserted HDD induces an Unknown error and causes the Accelerate button to disappear in the user interface
Win7-64
3236599
Acceleration status is always ‘No Sync’ in the OROM after changing Smart Response Technology mode via the user interface
Win7,Win7-64
3236764
RAID ‘Create’ button is available in user interface on system with Cache enabled when it is should not be shown
Win7,Win7-64
3236782
Revert changes to support Acceleration after hot-unplug and re-insert of SSD
Win7-64
3236874
Unable to modify cache volumes when maximum volume count is reached and volumes cannot be accelerated
Win7-64
3236401
Driver prevents SSD from being used as cache after hot-plugged and hot-inserted
Win7-64
3235188
RAIDCFG32 displays incorrect results
WinXP
3236285
User Interface mouse-over in Acceleration mode shows conflicting data for an Accelerated disk
Win7-64
3236092
From the 'Configure Volume' page on the 'Create' tab, the 'Specify the volume size:' and 'Advanced' sections are un-selectable by standard keyboard methods.
Win7-64
3236278
Obscured text string in the "Enable Acceleration" window under the "Select the disk or volume to accelerate:" selection box
Windows Sever2008
3236296
OROM does not wait long enough for device to become ready per ATAPI 7 and ATAPI 8 specification
N/A
3236038
RST Caching fails to resume from S4 after entering OROM>Acceleration Options and sometimes causes BSOD 0050 & 0051
N/A
3236140
RST user interface exposes option to create additional matrix RAID volume when the maximum possible number of RAID volumes has been reached
Win7-64
3236222
An unknown error is induced if user attempts to change the type of a second R1 volume while a create volume from disk R1 migration is occurring
Win7-64
3235067
Intel® Smart Response Technology is not honoring user's power plan
Win7-64
3235998
When trying to enable acceleration, the disk selection screen displays full disk capacity, max 64 GB for the cache which is not true at all times
Win7, Win7-64
3236125
Accelerated pass-through data disk: Error message displayed in user interface when trying to use a different SSD to Accelerate the disk after auto-transition Enhanced mode to OFF due to missing Cache SSD
Win7, Win7-64
3236126
Email Notify Setup step 2 in help is obsolete
Vista-64, Win7-64, Server2008-64
3235412
"Disk data cache" resets to "enable" after resuming from S4/S5 in user interface
N/A
3235924
RCfgSata utility Successfully Accelerates an Invalid Smart Response Technology Volume with 2 SSDs in Max mode.
N/A
3235475
System does not reconstruct data after a S3 is performed from windows which may lead to possible OS corruption
Win7, Win7-64
3236120
“Enable Acceleration” is available to user after cache hot-plugged and hot-inserted without a system reboot.
Win7-