Casper v0.3
Posté: Mar 17 Jan 2012 08:03
Giantpune vient de publier Casper, un nouveau programme pour la Wii conçu pour charger BootMii depuis une carte SD. Vous pouvez utiliser cette application avec l'exploit homebrew de votre choix pour démarrer une variété de choses, y compris NEEK sur une wii non modifiée.
Compatible avec wii en 4.2 et 4.3
Nécessite l'ios 53 v5663 propre et sans patch
Pour lancer Bootmii avec vous avez besoin de mettre à la racine de la sd le ficher armboot.bin que vous allez renommer en bootmii_ios.bin.
Casper écrit dans la nand , mais dès l'extinction de la console les données seront supprimées.
Changelog
v0.3
added suport for newer IOS present in cheap-o wiis
v0.2
a few changes suggested by tueidj
accept parameters via argv. supported are:
"--iosV=" specify ios version. 8-bit dec number is allowed.
"--iosR=" pass an ios revision to set for loaded module. 16-bit dec or hex with the prefix "0x" is allowed
"--app=" specify a file to be read from the SD card. it should start with "sd:/".
"--geckoChannel=" load from USB gecko flash. this is the gecko slot to use: 0 or 1.
"--geckoOffset=" offset in the usb gecko flash to read the binary. format is the same as the twilight hack a u32 is read from that offset which is the size, and the rest of the data follows. 32-bit numbers in dec, or hex with a 0x prefix are allowed.
If loading the SD path fails, then try to load from USB gecko flash at 0x20000 in slot 1 then slot 0
default to passing IOS 254 v0xff01 to module so if it loading is ceilingcat, it will skip the autoboot
Here's a few examples of the args in action:
# use all default settings:
wiiload ./casper.elf
# use armboot.bin from the bootmii folder:
wiiload ./casper.elf --app=sd:/bootmii/armboot.bin
# read from USB gecko flash in slot 1 from offset 0x30000 and set flags as IOS12 v13398
wiiload ./casper.elf --iosV=12 --iosR=0x3456 --geckoChannel=1 --geckoOffset=0x30000
Télécharger Casper V0.3
Source