Tgames Actualité Consoles et Homebrew

Note: The files available for Advanced Download can be patched and have their version/slot numbers changed.
User Defined Custom Downloads can get ANY IOS (and optionally patch it), MIOS, or System Menu.

*Any changes you make to the Options can be saved (settings will be retrieved the next time the program is started)

ModMii 4.4.4 Custom Guide
Generated on 15/12/2010 - 0:40:05.51
Check for updates at tinyurl.com/ModMiiNow


This Guide was generated using the following parameters:

* Wii is currently a virgin (un-modified)
* Current firmware is 4.3U
* Desired firmware is 4.1U

* Download Photo Channel
* Download Internet Channel
* Download Weather Channel
* Download News Channel
* Download Mii Channel
* Download Shopping Channel (and IOS56)
* Download Wii Speak Channel

* Download Extra Brick Protection
* Install Dark Wii Red Theme
* Do not update active IOSs



This software is not for sale. If you paid for this software or a "bundle" you have been scammed.

THIS PACKAGE COMES WITH ABSOLUTELY NO WARRANTY, NEITHER STATED NOR IMPLIED.
NO ONE BUT YOURSELF IS TO BE HELD RESPONSIBLE FOR ANY DAMAGE THIS MAY CAUSE TO YOUR NINTENDO WII CONSOLE!
USE THIS AT YOUR OWN RISK!



IMPORTANT NOTES:

*This guide does NOT require a Wifi connection on your Wii.
*An SD card formatted to FAT(32) required (Best results are with non-SDHC cards, SDHC will only work on 4.0 or above).
*If you get errors during any of the steps reformat your SD card as FAT or FAT32
*Turn off WiiConnect24 and take out all gamecube memory cards/controllers when modding the Wii (unless instructed otherwise).
*If your Wii ever freezes, hold the power button on the Wii for 5 seconds to power it off then try again.
*Don’t ever accept a new Nintendo update without first googling to see if it’s safe. The last update (to 4.3) was released in late June 2010 and is NOT safe to accept. If you accept an official Nintendo update after modding the Wii, you may lose some or all of your modifications.
*Never uninstall a system menu or IOS
*Do not install untested wads/themes without Bootmii or Priiloader installed.
*This custom guide is great start, but Wii modding is always evolving. Check for updates online, and remember, google is your friend.
*If you have questions, a more detailed guide can be found here: https://www.completesoftmodguide.tk




1) INSTALLING THE HOMEBREW CHANNEL (HBC) AND BOOTMII
=================================================

EXPLOITS
--------
You only need to perform ONE of the following exploits


Note: if this Wii was previously modified, and it has either the HBC, BootMii as Boot2, or a Forwarder Channel installed, you can use that instead of an exploit (as it does not require physically owning a specific game).

If using BootMii as Boot2 to install the HBC, copy the 'BootMii' folder from your previous BootMii install to the root of your SD Card (or download it using ModMii). Then boot your wii, BootMii will load, go To the SD menu, load bootmini.elf. This will load the Hackmii Installer allowing you to reinstall the HBC.

If using a Forwarder Channel, just save the boot.elf/dol from the app you want to load (ie. SD:\apps\hackmii_installer\boot.elf or SD:\apps\MMM\boot.dol) to the location used by your SPECIFIC Forwarder Channel (ie. SD:\apps\usbloader\boot.dol). Then start the channel and the Hackmii Installer will load allowing you to reinstall the HBC. Note, if your forwarder channel only loads dol's and not elf's, launch MMM's boot.dol, then use its "App Manager" to load the Hackmii Installer.


SMASH STACK EXPLOIT
-------------------

REQUIREMENTS: * A copy of "Super Smash Brothers Brawl"
* A non-SDHC card (SDHC cards don't work)

Insert the Super Smash Brothers Brawl Game.

Launch the game withOUT the SD card in your wii, create a save file if you don't have one already,
Then go into the stage builder and delete all the stages. Then exit the game.

Afterwards, insert your SD Card, start the game and go to the stage builder,
it should launch the boot.elf/dol file saved on the root of your SD card.

If you forgot to delete the stages, you will experience an annoying but harmless crash.



INDIANA PWNS EXPLOIT
--------------------

REQUIREMENTS: * A copy of LEGO Indiana Jones
* A non-SDHC card (SDHC cards don't work)

A. Load the LEGO Indiana Jones game at least once
(otherwise you won't be able to copy over the hack).

B. Backup your personal LEGO Indiana Jones save file before copying the files to your SD Card (if applicable):

a) Put your SD card in your Wii and turn it on.
b) Go into Wii Options - Data Management - Save Data - Wii
c) Find your Indiana save, click on it, click "Copy", and click Yes. Now erase the save file from the Wii.
d) Put your SD card in your computer, and copy the "private" folder from the card to a safe place. Alternatively you can temporarily rename it.

C. Copy the files from the COPY_TO_SD to the root of your SD card (if you haven’t already) and insert it into your Wii

D. Go into Wii Options - Data Management - Save Data - Wii - SD Card
then copy over the "Indiana Pwns" save that corresponds to your region.

E. Play the Lego Indiana Jones game. Load the new save file.

You will be in the Main hall, walk towards the camera,
enter the first door on the right (Indy's left) and go into the 'Courtyard'.
Walk to the end and enter the 'Art Room', you will see a podium with 2 characters on it, talk to the left one.

Hit left twice (scrolling through his items) to choose the switch option (Black silhouette with a white arrow to another black silhouette)
Hit A to launch the boot.elf/dol file saved on the root of your SD card.



YU-GI-OWNED EXPLOIT
-------------------

REQUIREMENTS: * A copy of "Yu-Gi-Oh! 5D's"
* A non-SDHC card (SDHC cards don't work)

A. Load the Yu-Gi-Oh game at least once
(otherwise you won't be able to copy over the hack).

B. Backup your personal Yu-Gi-Oh save file before copying the files to your SD Card (if applicable):

a) Put your SD card in your Wii and turn it on.
b) Go into Wii Options - Data Management - Save Data - Wii
c) Find your Yu-Gi-Oh save, click on it, click "Copy", and click Yes. Now erase the save file from the Wii.
d) Put your SD card in your computer, and copy the "private" folder from the card to a safe place. Alternatively you can temporarily rename it.

C. Copy the files from the COPY_TO_SD to the root of your SD card (if you haven’t already) and insert it into your Wii

D. Go into Wii Options - Data Management - Save Data - Wii - SD Card
then copy over the "Yu-Gi-Oh" save that corresponds to your region.

E. Start the Yu-Gi-Oh game. The exploit is launched after continuing past the opening menu.






This runs the Hackmii Installer (and silently/automatically installs BootMii as IOS). Use the installer to install the Homebrew Channel (HBC) and Bootmii as Boot2 if possible. If you cannot install BootMii as Boot2, you also need to 'prepare an SD Card' for BootMii (as the 'BootMii' folder is required to launch BootMii as IOS or Boot2).

Note: If you get a 'no vulnerable IOS' error message, run ModMii again and this time select the 'Hackmii Solutions' option instead of 'ModMii Wizard' and follow the new instructions before continuing this guide.

After you exit the hackmii installer, you will be taken to the HBC.
Hit the home button. In the top right corner you will see the IOS used by the HBC.

If the HBC is using an IOS other than IOS58 or your homebrew channel is upside-down, make a note of it as it applies later in the guide (you will have to reinstall the HBC).

If it is using IOS58 and your HBC is not upside-down, you can skip the Reinstall The Homebrew Channel step when you get to it.




2) MAKING A NAND BACKUP
====================

While inside the Homebrew Channel, load BootMii by pressing home and clicking Launch Bootmii.
Press the power button on the wii 3 times to get to the last option, then press the reset button. [You can also navigate with a Gamecube controller]

Press reset to choose the first option, then follow the directions on the screen to make your NAND backup. [Bad blocks are no problem.]

Backup the Bootmii folder, NAND.bin, and keys.bin elsewhere and erase from the sd card (or rename it). You'll need these in case of emergencies, so don't lose them.
Go back to The Homebrew Channel.

Note: if Bootmii was installed as boot2, then it will show up as soon as the Wii is turned on AS LONG AS it finds the bootmii folder (mentioned above) on the root of the SD card.




3) INSTALL A PATCHED IOS236
========================

Start the Homebrew Channel.

VERY IMPORTANT!
In the Homebrew channel, if you do not have a working internet connection already set up, you will see an icon flashing in the bottom right corner of the screen indicating its inability to initialize the network. You MUST wait for the icon to stop flashing OR let it flash for 30-60 seconds before proceeding otherwise these apps will error shortly after being launched. If you encounter this harmless error, power off the Wii and repeat this step from the beginning. To increase your chances of success, add a working internet connection to your Wii via the official Wii Settings Menu, but be sure to say "No" when asked to perform an update.


You only need to perform ONE of the below methods.


Method A: Using IOS236 Installer
--------------------------------

After waiting 30-60 seconds for the HBC to attempt to initialize the network, launch "IOS236 Installer v5 MOD".
Note: This app must be launched using HBC v1.0.7 or higher in order to work properly.

It should say "IOS236 installation is complete!" and return to The Homebrew Channel.

If you experience errors, keep trying and it should eventually work.
If you continue to experience errors you can try using Simple IOS Patcher instead.
Once either method successfully installs IOS236, you can move onto the next step.


Method B: Using Simple IOS Patcher
----------------------------------

After waiting 30-60 seconds for the HBC to attempt to initialize the network, launch "IOS236 Installer".
Note: This app must be launched using HBC v1.0.7 or higher in order to work properly.

Choose "IOS36" (already selected by default) and push A,
Select "Install IOS to slot" and choose 236,
Select "Install patched IOS36" leaving the 4 patches set to "yes" and press A,
Choose "Load IOS from SD card".

Confirm your choice with the A button,
When prompted, push A to continue the installation.
When the installation is over you'll be back at the Main Menu,
Then push B button to exit.

If you experience errors, keep trying and it should eventually work.
If you continue to experience errors you can try using IOS236 Installer instead.
Once either method successfully installs IOS236, you can move onto the next step.




4) INSTALL WADS
============

Load Multi-Manager Mod (MMM) via the HomeBrew Channel.
If IOS236 is not already loaded, select "Load another IOS", then select IOS236

Note: If this step fails with error -ret 2011 or other, you may need to retry patching IOS236. If the Wii was previously softmodded, you can try loading cIOS250 (or others like 202,222,223,224,236,249)

In Multi-Manager Mod's main menu, go down to select "WAD Manager".

Install the following WADs from the WAD folder (this list of WADs is unique to how you answered the Wizard's questions).

Be careful not to install any additional wads that may have been previously saved in this folder (they may be safe, but I cannot say for sure).

Hold + for 2 seconds to select all the WADs in the folder. Then Press A twice to install them all.
If any files fail to install properly, they will remain marked for installation, so just retry installing those files.


Your unique list of wads to install are as follows:

* IOS11v16174(IOS60v6174[FS-ES-NP])
* IOS20v16174(IOS60v6174[FS-ES-NP])
* IOS30v16174(IOS60v6174[FS-ES-NP])
* IOS50v14889(IOS50v4889[FS-ES-NP])
* IOS60v16174(IOS60v6174[FS-ES-NP])
* IOS70v16687(IOS70v6687[FS-ES-NP])
* SystemMenu_4.1U_v449_DarkWiiRed
* cIOS202[57]-v5
* cIOS223[37-38]-v4
* cIOS222[38]-v5
* cIOS224[57]-v5
* cIOS250[57]-v20
* cIOS249[56]-v20
* RVL-cmios-v4_WiiGator_GCBL_v0.2
* Mii-Channel-NUS-v6
* Photo-Channel-1.1-NUS-v3
* Shopping-Channel-NUS-v20
* Opera-Internet-Channel-NUS(U)
* Weather-Channel-NUS-v7(U)
* NEWS-Channel-NUS-v7(U)
* Wii-Speak-Channel-NUS(U)
* IOS56-64-v5662
* IOS58-64-v6176
* USBLoader(s)-ahbprot58-SD-USB-v3-IDCL
This is a forwarder channel that will load the first file it finds from the following list:
SD:/apps/usbloader/boot.dol
USB:/apps/usbloader/boot.dol
SD:/apps/usb-loader/boot.dol
USB:/apps/usb-loader/boot.dol
SD:/apps/usbloader_cfg/boot.dol
USB:/apps/usbloader_cfg/boot.dol
SD:/apps/WiiFlow/boot.dol
USB:/apps/WiiFlow/boot.dol
SD:/apps/usbloader_gx/boot.dol
USB:/apps/usbloader_gx/boot.dol
Note: IOS58 is required and it can launch files off an SD Card, a FAT32 Hard Drive
and/or an NTFS Hard Drive. It also supports meta.xml arguments and is able to
launch apps with direct hardware access.
You should always have at least one forwarder channel installed on your Wii,
that way, in the event of accidental update, you will be able to rehack your Wii without relying on a disc based exploit

Note: Whenever you install a new System Menu, Priiloader is uninstalled. So be sure to reinstall it afterwards (especially if you do not have bootmii as boot2)




5) INSTALL PRIILOADER
==================

Launch "Priiloader 236" via the Homebrew Channel

After the Priiloader Installer loads, press + to install it.

You may get an error for "loader.ini" and/or "password.txt" simply ignore these.

After successfully installing Priiloader, access it by powering off the Wii,
then powering it back on while holding reset until you see the Priiloader menu.

You should install some system menu hacks now (by going to System Menu hacks option).

RECOMMENDED HACKS: Block Disc Updates, Block Online Updates, Replace Health Screen, Auto-Press A at Health Screen, Region-Free Everything, remove no copy save file protection, and Move Disc Channel.

The priiloader menu is white by default, you can change it to black in the Priiloader settings if you prefer.

One of the special functions of Priiloader is that it can autoboot any app/file instead of the system menu. Some apps (like crazyIntro) can't be used without it.
For details on how to do so, visit https://www.completesoftmodguide.tk/system-hacks/priiloader




6) REINSTALL THE HOMEBREW CHANNEL (if applicable)
==============================================

Earlier you should have checked what IOS is used by the Homebrew Channel (HBC). If the IOS used by your HBC is IOS58 and your HBC is not upside-down, you can skip this step.

If the HBC is using an IOS other than IOS58 or your HBC is upside-down, you should reinstall the HBC.

Launch the HackMii_Installer via the HBC.
Use the Hackmii Installer to fix/re-install the HBC. Once you've successfully reinstalled the HBC, you can move onto the next step of the guide.

If the HBC is failing to load the HackMii_Installer (just blackscreens), instead launch the Hackmii Installer using the method described in the First Step




7) AFTER MODDING
=============

After you are done modding your Wii, you can optionally delete any unnecesarry files
by using ModMii's "File Cleanup" Feature.

At this point you're practically done.
Now you should be downloading the latest homebrew applications and setting them up on
your SD Card (or FAT32 USB Hard Drive) so they can be launched via the HBC.

For playing your backups off a USB hard drive, run the USB-Loader Setup feature from ModMii's Main Menu

For downloading applications, you should:
* Check out ModMii's batch download pages as it has many popular apps available for download.
* Download Homebrew Browser via ModMii to get many popular apps, but this is an online only Wii application (https://www.completesoftmodguide.tk/how-to-use/hbb)
* For those without internet on their Wii, check out this list of Homebrew applications (wiibrew.org/wiki/List_of_all_homebrew).
Another great resource is webrewwii.blogspot.com

After getting whatever apps you want, you should get a boot.dol file and possibly a icon.png and meta.xml.
For HBC to read your SD/USB correctly, your card must be structured SD:/apps/application name/boot.dol
If you have a *.dol not named boot.dol, rename it boot.dol, otherwise it will not be recognized by the HBC.
(optional: the icon.png and meta.xml should be saved in the same place as the boot.dol)



8) SUPPORT XFLAK
=============

IF MODMII WORKED FOR YOU, PLEASE VOTE IN FAVOUR OF THE PROGRAM HERE (tinyurl.com/ModMiiNow)

DONATIONS CAN OPTIONALLY BE MADE VIA PAYPAL TO XFLAK40@HOTMAIL.COM

CHECK OUT MY TOP CHANNELS HERE (tinyurl.com/topchannels)

CHECK OUT MY CRAZY INTRO VIDEOS HERE (tinyurl.com/crazyintro)

ModMii 4.4.4 Custom Guide
Generated on 15/12/2010 - 0:44:39.35
Check for updates at tinyurl.com/ModMiiNow


This Guide was generated using the following parameters:

* Wii is currently a virgin (un-modified)
* Current firmware is 3.XE
* Desired firmware is 4.1E

* Download Photo Channel
* Download Internet Channel
* Download Weather Channel
* Download News Channel
* Download Mii Channel
* Download Shopping Channel (and IOS56)
* Download Wii Speak Channel

* Download Extra Brick Protection
* Install Dark Wii Red Theme
* Update active IOSs



This software is not for sale. If you paid for this software or a "bundle" you have been scammed.

THIS PACKAGE COMES WITH ABSOLUTELY NO WARRANTY, NEITHER STATED NOR IMPLIED.
NO ONE BUT YOURSELF IS TO BE HELD RESPONSIBLE FOR ANY DAMAGE THIS MAY CAUSE TO YOUR NINTENDO WII CONSOLE!
USE THIS AT YOUR OWN RISK!



IMPORTANT NOTES:

*This guide does NOT require a Wifi connection on your Wii.
*An SD card formatted to FAT(32) required (Best results are with non-SDHC cards, SDHC will only work on 4.0 or above).
*If you get errors during any of the steps reformat your SD card as FAT or FAT32
*Turn off WiiConnect24 and take out all gamecube memory cards/controllers when modding the Wii (unless instructed otherwise).
*If your Wii ever freezes, hold the power button on the Wii for 5 seconds to power it off then try again.
*Don’t ever accept a new Nintendo update without first googling to see if it’s safe. The last update (to 4.3) was released in late June 2010 and is NOT safe to accept. If you accept an official Nintendo update after modding the Wii, you may lose some or all of your modifications.
*Never uninstall a system menu or IOS
*Do not install untested wads/themes without Bootmii or Priiloader installed.
*This custom guide is great start, but Wii modding is always evolving. Check for updates online, and remember, google is your friend.
*If you have questions, a more detailed guide can be found here: https://www.completesoftmodguide.tk




1) INSTALLING THE HOMEBREW CHANNEL (HBC) AND BOOTMII
=================================================



Run BannerBomb v1 by going to Settings, Data Management, Channels, SD Card and choosing yes to load boot.dol/elf
Note: If it doesn't work for you, visit https://bannerbomb.qoid.us/ for more variations of either version of bannerbomb.



This runs the Hackmii Installer (and silently/automatically installs BootMii as IOS). Use the installer to install the Homebrew Channel (HBC) and Bootmii as Boot2 if possible. If you cannot install BootMii as Boot2, you also need to 'prepare an SD Card' for BootMii (as the 'BootMii' folder is required to launch BootMii as IOS or Boot2).

Note: If you get a 'no vulnerable IOS' error message, run ModMii again and this time select the 'Hackmii Solutions' option instead of 'ModMii Wizard' and follow the new instructions before continuing this guide.

After you exit the hackmii installer, you will be taken to the HBC.
Hit the home button. In the top right corner you will see the IOS used by the HBC.

If the HBC is using an IOS other than IOS58 or your homebrew channel is upside-down, make a note of it as it applies later in the guide (you will have to reinstall the HBC).

If it is using IOS58 and your HBC is not upside-down, you can skip the Reinstall The Homebrew Channel step when you get to it.




2) MAKING A NAND BACKUP
====================

While inside the Homebrew Channel, load BootMii by pressing home and clicking Launch Bootmii.
Press the power button on the wii 3 times to get to the last option, then press the reset button. [You can also navigate with a Gamecube controller]

Press reset to choose the first option, then follow the directions on the screen to make your NAND backup. [Bad blocks are no problem.]

Backup the Bootmii folder, NAND.bin, and keys.bin elsewhere and erase from the sd card (or rename it). You'll need these in case of emergencies, so don't lose them.
Go back to The Homebrew Channel.

Note: if Bootmii was installed as boot2, then it will show up as soon as the Wii is turned on AS LONG AS it finds the bootmii folder (mentioned above) on the root of the SD card.




3) INSTALL A PATCHED IOS236
========================

Start the Homebrew Channel.

VERY IMPORTANT!
In the Homebrew channel, if you do not have a working internet connection already set up, you will see an icon flashing in the bottom right corner of the screen indicating its inability to initialize the network. You MUST wait for the icon to stop flashing OR let it flash for 30-60 seconds before proceeding otherwise these apps will error shortly after being launched. If you encounter this harmless error, power off the Wii and repeat this step from the beginning. To increase your chances of success, add a working internet connection to your Wii via the official Wii Settings Menu, but be sure to say "No" when asked to perform an update.


You only need to perform ONE of the below methods.


Method A: Using IOS236 Installer
--------------------------------

After waiting 30-60 seconds for the HBC to attempt to initialize the network, launch "IOS236 Installer v5 MOD".
Note: This app must be launched using HBC v1.0.7 or higher in order to work properly.

It should say "IOS236 installation is complete!" and return to The Homebrew Channel.

If you experience errors, keep trying and it should eventually work.
If you continue to experience errors you can try using Simple IOS Patcher instead.
Once either method successfully installs IOS236, you can move onto the next step.


Method B: Using Simple IOS Patcher
----------------------------------

After waiting 30-60 seconds for the HBC to attempt to initialize the network, launch "IOS236 Installer".
Note: This app must be launched using HBC v1.0.7 or higher in order to work properly.

Choose "IOS36" (already selected by default) and push A,
Select "Install IOS to slot" and choose 236,
Select "Install patched IOS36" leaving the 4 patches set to "yes" and press A,
Choose "Load IOS from SD card".

Confirm your choice with the A button,
When prompted, push A to continue the installation.
When the installation is over you'll be back at the Main Menu,
Then push B button to exit.

If you experience errors, keep trying and it should eventually work.
If you continue to experience errors you can try using IOS236 Installer instead.
Once either method successfully installs IOS236, you can move onto the next step.




4) INSTALL WADS
============

Load Multi-Manager Mod (MMM) via the HomeBrew Channel.
If IOS236 is not already loaded, select "Load another IOS", then select IOS236

Note: If this step fails with error -ret 2011 or other, you may need to retry patching IOS236. If the Wii was previously softmodded, you can try loading cIOS250 (or others like 202,222,223,224,236,249)

In Multi-Manager Mod's main menu, go down to select "WAD Manager".

Install the following WADs from the WAD folder (this list of WADs is unique to how you answered the Wizard's questions).

Be careful not to install any additional wads that may have been previously saved in this folder (they may be safe, but I cannot say for sure).

Hold + for 2 seconds to select all the WADs in the folder. Then Press A twice to install them all.
If any files fail to install properly, they will remain marked for installation, so just retry installing those files.


Your unique list of wads to install are as follows:

* IOS11v16174(IOS60v6174[FS-ES-NP])
* IOS20v16174(IOS60v6174[FS-ES-NP])
* IOS30v16174(IOS60v6174[FS-ES-NP])
* IOS50v14889(IOS50v4889[FS-ES-NP])
* IOS60v16174(IOS60v6174[FS-ES-NP])
* IOS70v16687(IOS70v6687[FS-ES-NP])
* SystemMenu_4.1E_v450_DarkWiiRed
* cIOS202[57]-v5
* cIOS223[37-38]-v4
* cIOS222[38]-v5
* cIOS224[57]-v5
* cIOS250[57]-v20
* cIOS249[56]-v20
* RVL-cmios-v4_WiiGator_GCBL_v0.2
* Mii-Channel-NUS-v6
* Photo-Channel-1.1-NUS-v3
* Shopping-Channel-NUS-v20
* Opera-Internet-Channel-NUS[E]
* Weather-Channel-NUS-v7[E]
* NEWS-Channel-NUS-v7[E]
* Wii-Speak-Channel-NUS[E]
* IOS9-64-v1034
* IOS12-64-v526
* IOS13-64-v1032
* IOS14-64-v1032
* IOS15-64-v1032
* IOS17-64-v1032
* IOS21-64-v1039
* IOS22-64-v1294
* IOS28-64-v1807
* IOS31-64-v3608
* IOS33-64-v3608
* IOS34-64-v3608
* IOS35-64-v3608
* IOS36-64-v3608
* IOS37-64-v5663
* IOS38-64-v4124
* IOS41-64-v3607
* IOS43-64-v3607
* IOS45-64-v3607
* IOS46-64-v3607
* IOS48-64-v4124
* IOS53-64-v5663
* IOS55-64-v5663
* IOS56-64-v5662
* IOS57-64-v5919
* IOS58-64-v6176
* IOS61-64-v5662
* USBLoader(s)-ahbprot58-SD-USB-v3-IDCL
This is a forwarder channel that will load the first file it finds from the following list:
SD:/apps/usbloader/boot.dol
USB:/apps/usbloader/boot.dol
SD:/apps/usb-loader/boot.dol
USB:/apps/usb-loader/boot.dol
SD:/apps/usbloader_cfg/boot.dol
USB:/apps/usbloader_cfg/boot.dol
SD:/apps/WiiFlow/boot.dol
USB:/apps/WiiFlow/boot.dol
SD:/apps/usbloader_gx/boot.dol
USB:/apps/usbloader_gx/boot.dol
Note: IOS58 is required and it can launch files off an SD Card, a FAT32 Hard Drive
and/or an NTFS Hard Drive. It also supports meta.xml arguments and is able to
launch apps with direct hardware access.
You should always have at least one forwarder channel installed on your Wii,
that way, in the event of accidental update, you will be able to rehack your Wii without relying on a disc based exploit

Note: Whenever you install a new System Menu, Priiloader is uninstalled. So be sure to reinstall it afterwards (especially if you do not have bootmii as boot2)




5) INSTALL PRIILOADER
==================

Launch "Priiloader 236" via the Homebrew Channel

After the Priiloader Installer loads, press + to install it.

You may get an error for "loader.ini" and/or "password.txt" simply ignore these.

After successfully installing Priiloader, access it by powering off the Wii,
then powering it back on while holding reset until you see the Priiloader menu.

You should install some system menu hacks now (by going to System Menu hacks option).

RECOMMENDED HACKS: Block Disc Updates, Block Online Updates, Replace Health Screen, Auto-Press A at Health Screen, Region-Free Everything, remove no copy save file protection, and Move Disc Channel.

The priiloader menu is white by default, you can change it to black in the Priiloader settings if you prefer.

One of the special functions of Priiloader is that it can autoboot any app/file instead of the system menu. Some apps (like crazyIntro) can't be used without it.
For details on how to do so, visit https://www.completesoftmodguide.tk/system-hacks/priiloader




6) REINSTALL THE HOMEBREW CHANNEL (if applicable)
==============================================

Earlier you should have checked what IOS is used by the Homebrew Channel (HBC). If the IOS used by your HBC is IOS58 and your HBC is not upside-down, you can skip this step.

If the HBC is using an IOS other than IOS58 or your HBC is upside-down, you should reinstall the HBC.

Launch the HackMii_Installer via the HBC.
Use the Hackmii Installer to fix/re-install the HBC. Once you've successfully reinstalled the HBC, you can move onto the next step of the guide.

If the HBC is failing to load the HackMii_Installer (just blackscreens), instead launch the Hackmii Installer using the method described in the First Step




7) AFTER MODDING
=============

After you are done modding your Wii, you can optionally delete any unnecesarry files
by using ModMii's "File Cleanup" Feature.

If you choose not to use the File Cleanup feature, in order to avoid having your Wii freeze when accessing the SD Card Menu, you should delete the 'aktn' folder where bannerbomb is saved (SD:\private\wii\title\aktn), or rename the entire 'private' folder.

At this point you're practically done.
Now you should be downloading the latest homebrew applications and setting them up on
your SD Card (or FAT32 USB Hard Drive) so they can be launched via the HBC.

For playing your backups off a USB hard drive, run the USB-Loader Setup feature from ModMii's Main Menu

For downloading applications, you should:
* Check out ModMii's batch download pages as it has many popular apps available for download.
* Download Homebrew Browser via ModMii to get many popular apps, but this is an online only Wii application (https://www.completesoftmodguide.tk/how-to-use/hbb)
* For those without internet on their Wii, check out this list of Homebrew applications (wiibrew.org/wiki/List_of_all_homebrew).
Another great resource is webrewwii.blogspot.com

After getting whatever apps you want, you should get a boot.dol file and possibly a icon.png and meta.xml.
For HBC to read your SD/USB correctly, your card must be structured SD:/apps/application name/boot.dol
If you have a *.dol not named boot.dol, rename it boot.dol, otherwise it will not be recognized by the HBC.
(optional: the icon.png and meta.xml should be saved in the same place as the boot.dol)



8) SUPPORT XFLAK
=============

IF MODMII WORKED FOR YOU, PLEASE VOTE IN FAVOUR OF THE PROGRAM HERE (tinyurl.com/ModMiiNow)

DONATIONS CAN OPTIONALLY BE MADE VIA PAYPAL TO XFLAK40@HOTMAIL.COM

CHECK OUT MY TOP CHANNELS HERE (tinyurl.com/topchannels)

CHECK OUT MY CRAZY INTRO VIDEOS HERE (tinyurl.com/crazyintro)

ModMii 4.4.4 Custom Guide
Generated on 15/12/2010 - 0:45:47.66
Check for updates at tinyurl.com/ModMiiNow


This Guide was generated using the following parameters:

* Wii is currently a virgin (un-modified)
* Current firmware is 3.XK (Korean Wii's are hacked differently than Wii's from other regions.)
* Desired firmware is 4.1K

* Download Photo Channel
* Download Mii Channel
* Download Shopping Channel (and IOS56)

* Download Extra Brick Protection
* Install Dark Wii Red Theme
* Update active IOSs



This software is not for sale. If you paid for this software or a "bundle" you have been scammed.

THIS PACKAGE COMES WITH ABSOLUTELY NO WARRANTY, NEITHER STATED NOR IMPLIED.
NO ONE BUT YOURSELF IS TO BE HELD RESPONSIBLE FOR ANY DAMAGE THIS MAY CAUSE TO YOUR NINTENDO WII CONSOLE!
USE THIS AT YOUR OWN RISK!



IMPORTANT NOTES:

*This guide does NOT require a Wifi connection on your Wii.
*An SD card formatted to FAT(32) required (Best results are with non-SDHC cards, SDHC will only work on 4.0 or above).
*If you get errors during any of the steps reformat your SD card as FAT or FAT32
*Turn off WiiConnect24 and take out all gamecube memory cards/controllers when modding the Wii (unless instructed otherwise).
*If your Wii ever freezes, hold the power button on the Wii for 5 seconds to power it off then try again.
*Don’t ever accept a new Nintendo update without first googling to see if it’s safe. The last update (to 4.3) was released in late June 2010 and is NOT safe to accept. If you accept an official Nintendo update after modding the Wii, you may lose some or all of your modifications.
*Never uninstall a system menu or IOS
*Do not install untested wads/themes without Bootmii or Priiloader installed.
*This custom guide is great start, but Wii modding is always evolving. Check for updates online, and remember, google is your friend.
*If you have questions, a more detailed guide can be found here: https://www.completesoftmodguide.tk




1) LAUNCH Multi-Mod-Manager (MMM) USING BANNERBOMB
===============================================

Run BannerBomb v1 by going to Settings, Data Management, Channels, SD Card and choosing yes to load boot.dol/elf
Note: If it doesn't work for you, visit https://bannerbomb.qoid.us/ for more variations of either version of bannerbomb.

This will launch Multi-Mod-Manager.



2) INSTALL IOS58 USING Multi-Mod Manager (MMM)
===========================================

In Multi-Manager Mod's main menu, Go down to select "WAD Manager".

Now install IOS58v6176.
Navigate to the wad and hit A twice to install the IOS individually.

Be careful not to install any additional wads that may have been previously saved in this folder (they may be safe, but I cannot say for sure).

Make sure the file installed properly.
Only move onto the next step after successfully installing the wad, but do NOT exit MMM.



3) INSTALLING THE HOMEBREW CHANNEL (HBC) and BOOTMII
=================================================

Back in the MMM main menu, choose "App Manager" and press A.

Launch the HackMii_Installer

This runs the Hackmii Installer (and silently/automatically installs BootMii as IOS). Use the installer to install the Homebrew Channel (HBC) and Bootmii as Boot2 if possible. If you cannot install BootMii as Boot2, you also need to 'prepare an SD Card' for BootMii (as the 'BootMii' folder is required to launch BootMii as IOS or Boot2).



4) MAKING A NAND BACKUP
====================

While inside the Homebrew Channel, load BootMii by pressing home and clicking Launch Bootmii.
Press the power button on the wii 3 times to get to the last option, then press the reset button. [You can also navigate with a Gamecube controller]

Press reset to choose the first option, then follow the directions on the screen to make your NAND backup. [Bad blocks are no problem.]

Backup the Bootmii folder, NAND.bin, and keys.bin elsewhere and erase from the sd card (or rename it). You'll need these in case of emergencies, so don't lose them.
Go back to The Homebrew Channel.

Note: if Bootmii was installed as boot2, then it will show up as soon as the Wii is turned on AS LONG AS it finds the bootmii folder (mentioned above) on the root of the SD card.




5) INSTALL A PATCHED IOS236
========================

Start the Homebrew Channel.

VERY IMPORTANT!
In the Homebrew channel, if you do not have a working internet connection already set up, you will see an icon flashing in the bottom right corner of the screen indicating its inability to initialize the network. You MUST wait for the icon to stop flashing OR let it flash for 30-60 seconds before proceeding otherwise these apps will error shortly after being launched. If you encounter this harmless error, power off the Wii and repeat this step from the beginning. To increase your chances of success, add a working internet connection to your Wii via the official Wii Settings Menu, but be sure to say "No" when asked to perform an update.


You only need to perform ONE of the below methods.


Method A: Using IOS236 Installer
--------------------------------

After waiting 30-60 seconds for the HBC to attempt to initialize the network, launch "IOS236 Installer v5 MOD".
Note: This app must be launched using HBC v1.0.7 or higher in order to work properly.

It should say "IOS236 installation is complete!" and return to The Homebrew Channel.

If you experience errors, keep trying and it should eventually work.
If you continue to experience errors you can try using Simple IOS Patcher instead.
Once either method successfully installs IOS236, you can move onto the next step.


Method B: Using Simple IOS Patcher
----------------------------------

After waiting 30-60 seconds for the HBC to attempt to initialize the network, launch "IOS236 Installer".
Note: This app must be launched using HBC v1.0.7 or higher in order to work properly.

Choose "IOS36" (already selected by default) and push A,
Select "Install IOS to slot" and choose 236,
Select "Install patched IOS36" leaving the 4 patches set to "yes" and press A,
Choose "Load IOS from SD card".

Confirm your choice with the A button,
When prompted, push A to continue the installation.
When the installation is over you'll be back at the Main Menu,
Then push B button to exit.

If you experience errors, keep trying and it should eventually work.
If you continue to experience errors you can try using IOS236 Installer instead.
Once either method successfully installs IOS236, you can move onto the next step.




6) INSTALL WADS
============

Load Multi-Manager Mod (MMM) via the HomeBrew Channel.
If IOS236 is not already loaded, select "Load another IOS", then select IOS236

Note: If this step fails with error -ret 2011 or other, you may need to retry patching IOS236. If the Wii was previously softmodded, you can try loading cIOS250 (or others like 202,222,223,224,236,249)

In Multi-Manager Mod's main menu, go down to select "WAD Manager".

Install the following WADs from the WAD folder (this list of WADs is unique to how you answered the Wizard's questions).

Be careful not to install any additional wads that may have been previously saved in this folder (they may be safe, but I cannot say for sure).

Hold + for 2 seconds to select all the WADs in the folder. Then Press A twice to install them all.
If any files fail to install properly, they will remain marked for installation, so just retry installing those files.


Your unique list of wads to install are as follows:

* IOS11v16174(IOS60v6174[FS-ES-NP])
* IOS20v16174(IOS60v6174[FS-ES-NP])
* IOS30v16174(IOS60v6174[FS-ES-NP])
* IOS40v16174(IOS60v6174[FS-ES-NP])
* IOS50v14889(IOS50v4889[FS-ES-NP])
* IOS52v15661(IOS52v5661[FS-ES-NP])
* IOS60v16174(IOS60v6174[FS-ES-NP])
* IOS70v16687(IOS70v6687[FS-ES-NP])
* SystemMenu_4.1K_v454_DarkWiiRed
* cIOS202[57]-v5
* cIOS223[37-38]-v4
* cIOS222[38]-v5
* cIOS224[57]-v5
* cIOS250[57]-v20
* cIOS249[56]-v20
* RVL-cmios-v4_WiiGator_GCBL_v0.2
* Mii-Channel-NUS-v6
* Photo-Channel-1.1-NUS-v3[K]
* Shopping-Channel-NUS-v20[K]
* IOS9-64-v1034
* IOS12-64-v526
* IOS13-64-v1032
* IOS14-64-v1032
* IOS15-64-v1032
* IOS17-64-v1032
* IOS21-64-v1039
* IOS22-64-v1294
* IOS28-64-v1807
* IOS31-64-v3608
* IOS33-64-v3608
* IOS34-64-v3608
* IOS35-64-v3608
* IOS36-64-v3608
* IOS37-64-v5663
* IOS38-64-v4124
* IOS41-64-v3607
* IOS43-64-v3607
* IOS45-64-v3607
* IOS46-64-v3607
* IOS48-64-v4124
* IOS53-64-v5663
* IOS55-64-v5663
* IOS56-64-v5662
* IOS57-64-v5919
* IOS58-64-v6176
* IOS61-64-v5662
* USBLoader(s)-ahbprot58-SD-USB-v3-IDCL
This is a forwarder channel that will load the first file it finds from the following list:
SD:/apps/usbloader/boot.dol
USB:/apps/usbloader/boot.dol
SD:/apps/usb-loader/boot.dol
USB:/apps/usb-loader/boot.dol
SD:/apps/usbloader_cfg/boot.dol
USB:/apps/usbloader_cfg/boot.dol
SD:/apps/WiiFlow/boot.dol
USB:/apps/WiiFlow/boot.dol
SD:/apps/usbloader_gx/boot.dol
USB:/apps/usbloader_gx/boot.dol
Note: IOS58 is required and it can launch files off an SD Card, a FAT32 Hard Drive
and/or an NTFS Hard Drive. It also supports meta.xml arguments and is able to
launch apps with direct hardware access.
You should always have at least one forwarder channel installed on your Wii,
that way, in the event of accidental update, you will be able to rehack your Wii without relying on a disc based exploit

Note: Whenever you install a new System Menu, Priiloader is uninstalled. So be sure to reinstall it afterwards (especially if you do not have bootmii as boot2)




7) INSTALL PRIILOADER
==================

Launch "Priiloader 236" via the Homebrew Channel

After the Priiloader Installer loads, press + to install it.

You may get an error for "loader.ini" and/or "password.txt" simply ignore these.

After successfully installing Priiloader, access it by powering off the Wii,
then powering it back on while holding reset until you see the Priiloader menu.

You should install some system menu hacks now (by going to System Menu hacks option).

RECOMMENDED HACKS: Block Disc Updates, Block Online Updates, Replace Health Screen, Auto-Press A at Health Screen, Region-Free Everything, remove no copy save file protection, and Move Disc Channel.

The priiloader menu is white by default, you can change it to black in the Priiloader settings if you prefer.

One of the special functions of Priiloader is that it can autoboot any app/file instead of the system menu. Some apps (like crazyIntro) can't be used without it.
For details on how to do so, visit https://www.completesoftmodguide.tk/system-hacks/priiloader




8) REINSTALL THE HOMEBREW CHANNEL (if applicable)
==============================================

Earlier you should have checked what IOS is used by the Homebrew Channel (HBC). If the IOS used by your HBC is IOS58 and your HBC is not upside-down, you can skip this step.

If the HBC is using an IOS other than IOS58 or your HBC is upside-down, you should reinstall the HBC.

Launch the HackMii_Installer via the HBC.
Use the Hackmii Installer to fix/re-install the HBC. Once you've successfully reinstalled the HBC, you can move onto the next step of the guide.

If the HBC is failing to load the HackMii_Installer (just blackscreens), instead launch the Hackmii Installer using the method described in the First Step




9) AFTER MODDING
=============

After you are done modding your Wii, you can optionally delete any unnecesarry files
by using ModMii's "File Cleanup" Feature.

If you choose not to use the File Cleanup feature, in order to avoid having your Wii freeze when accessing the SD Card Menu, you should delete the 'aktn' folder where bannerbomb is saved (SD:\private\wii\title\aktn), or rename the entire 'private' folder.

At this point you're practically done.
Now you should be downloading the latest homebrew applications and setting them up on
your SD Card (or FAT32 USB Hard Drive) so they can be launched via the HBC.

For playing your backups off a USB hard drive, run the USB-Loader Setup feature from ModMii's Main Menu

For downloading applications, you should:
* Check out ModMii's batch download pages as it has many popular apps available for download.
* Download Homebrew Browser via ModMii to get many popular apps, but this is an online only Wii application (https://www.completesoftmodguide.tk/how-to-use/hbb)
* For those without internet on their Wii, check out this list of Homebrew applications (wiibrew.org/wiki/List_of_all_homebrew).
Another great resource is webrewwii.blogspot.com

After getting whatever apps you want, you should get a boot.dol file and possibly a icon.png and meta.xml.
For HBC to read your SD/USB correctly, your card must be structured SD:/apps/application name/boot.dol
If you have a *.dol not named boot.dol, rename it boot.dol, otherwise it will not be recognized by the HBC.
(optional: the icon.png and meta.xml should be saved in the same place as the boot.dol)



10) SUPPORT XFLAK
=============

IF MODMII WORKED FOR YOU, PLEASE VOTE IN FAVOUR OF THE PROGRAM HERE (tinyurl.com/ModMiiNow)

DONATIONS CAN OPTIONALLY BE MADE VIA PAYPAL TO XFLAK40@HOTMAIL.COM

CHECK OUT MY TOP CHANNELS HERE (tinyurl.com/topchannels)

CHECK OUT MY CRAZY INTRO VIDEOS HERE (tinyurl.com/crazyintro)

ModMii 4.4.4 HackMii Solutions Guide
Generated on 15/12/2010 - 0:48:10.97
Check for updates at tinyurl.com/ModMiiNow


This Guide was generated using the following parameters:

* Current firmware is 4.3U



This software is not for sale. If you paid for this software or a "bundle" you have been scammed.

THIS PACKAGE COMES WITH ABSOLUTELY NO WARRANTY, NEITHER STATED NOR IMPLIED.
NO ONE BUT YOURSELF IS TO BE HELD RESPONSIBLE FOR ANY DAMAGE THIS MAY CAUSE TO YOUR NINTENDO WII CONSOLE!
USE THIS AT YOUR OWN RISK!




IMPORTANT NOTES:

*This guide does NOT require a Wifi connection on your Wii.
*An SD card formatted to FAT(32) required (Best results are with non-SDHC cards, SDHC will only work on 4.0 or above).
*If you get errors during any of the steps reformat your SD card as FAT or FAT32
*Turn off WiiConnect24 and take out all gamecube memory cards/controllers when modding the Wii (unless instructed otherwise).
*If your Wii ever freezes, hold the power button on the Wii for 5 seconds to power it off then try again.
*Don’t ever accept a new Nintendo update without first googling to see if it’s safe. The last update (to 4.3) was released in late June 2010 and is NOT safe to accept. If you accept an official Nintendo update after modding the Wii, you may lose some or all of your modifications.
*Never uninstall a system menu or IOS
*Do not install untested wads/themes without Bootmii or Priiloader installed.
*This custom guide is great start, but Wii modding is always evolving. Check for updates online, and remember, google is your friend.
*If you have questions, a more detailed guide can be found here: https://www.completesoftmodguide.tk




1) LAUNCH Multi-Mod Manager (MMM)
==============================

Start the Homebrew Channel (HBC) and load Multi-Mod Manager (MMM). Once you've loaded MMM, move onto the next step.

If you are missing the HBC or it is failing to load any apps (just blackscreens), you will need to launch MMM using another method.

EXPLOITS
You only need to perform ONE of the following exploits


Note: if this Wii was previously modified, and it still has a Forwarder Channel installed, you can use that to launch MMM instead of an exploit. Just save the boot.dol from the app you want to load (ie. SD:\apps\MMM\boot.dol) to the location used by your SPECIFIC Forwarder Channel (ie. SD:\apps\usbloader\boot.dol). Then start the channel and the app will load.


SMASH STACK EXPLOIT
-------------------

REQUIREMENTS: * A copy of "Super Smash Brothers Brawl"
* A non-SDHC card (SDHC cards don't work)

Insert the Super Smash Brothers Brawl Game.

Launch the game withOUT the SD card in your wii, create a save file if you don't have one already,
Then go into the stage builder and delete all the stages. Then exit the game.

Afterwards, insert your SD Card, start the game and go to the stage builder,
it should launch the boot.elf/dol file saved on the root of your SD card.

If you forgot to delete the stages, you will experience an annoying but harmless crash.



INDIANA PWNS EXPLOIT
--------------------

REQUIREMENTS: * A copy of LEGO Indiana Jones
* A non-SDHC card (SDHC cards don't work)

A. Load the LEGO Indiana Jones game at least once
(otherwise you won't be able to copy over the hack).

B. Backup your personal LEGO Indiana Jones save file before copying the files to your SD Card (if applicable):

a) Put your SD card in your Wii and turn it on.
b) Go into Wii Options - Data Management - Save Data - Wii
c) Find your Indiana save, click on it, click "Copy", and click Yes. Now erase the save file from the Wii.
d) Put your SD card in your computer, and copy the "private" folder from the card to a safe place. Alternatively you can temporarily rename it.

C. Copy the files from the COPY_TO_SD to the root of your SD card (if you haven’t already) and insert it into your Wii

D. Go into Wii Options - Data Management - Save Data - Wii - SD Card
then copy over the "Indiana Pwns" save that corresponds to your region.

E. Play the Lego Indiana Jones game. Load the new save file.

You will be in the Main hall, walk towards the camera,
enter the first door on the right (Indy's left) and go into the 'Courtyard'.
Walk to the end and enter the 'Art Room', you will see a podium with 2 characters on it, talk to the left one.

Hit left twice (scrolling through his items) to choose the switch option (Black silhouette with a white arrow to another black silhouette)
Hit A to launch the boot.elf/dol file saved on the root of your SD card.



YU-GI-OWNED EXPLOIT
-------------------

REQUIREMENTS: * A copy of "Yu-Gi-Oh! 5D's"
* A non-SDHC card (SDHC cards don't work)

A. Load the Yu-Gi-Oh game at least once
(otherwise you won't be able to copy over the hack).

B. Backup your personal Yu-Gi-Oh save file before copying the files to your SD Card (if applicable):

a) Put your SD card in your Wii and turn it on.
b) Go into Wii Options - Data Management - Save Data - Wii
c) Find your Yu-Gi-Oh save, click on it, click "Copy", and click Yes. Now erase the save file from the Wii.
d) Put your SD card in your computer, and copy the "private" folder from the card to a safe place. Alternatively you can temporarily rename it.

C. Copy the files from the COPY_TO_SD to the root of your SD card (if you haven’t already) and insert it into your Wii

D. Go into Wii Options - Data Management - Save Data - Wii - SD Card
then copy over the "Yu-Gi-Oh" save that corresponds to your region.

E. Start the Yu-Gi-Oh game. The exploit is launched after continuing past the opening menu.








2) INSTALL IOS58 USING Multi-Mod Manager (MMM)
===========================================

In Multi-Manager Mod's main menu, Go down to select "WAD Manager".

Now install IOS58v6176.
Navigate to the wad and hit A twice to install the IOS individually.

Be careful not to install any additional wads that may have been previously saved in this folder (they may be safe, but I cannot say for sure).

Make sure the file installed properly.
Only move onto the next step after successfully installing the wad, but do NOT exit MMM.



3) INSTALL THE HOMEBREW CHANNEL (HBC)
==================================

In MMM's main menu, select "App Manager" and then select the HackMii_Installer.
Use the Hackmii Installer to fix/re-install the HBC. If you haven't done so already, you should also install BootMii as Boot2 (if possible).
Once you've successfully reinstalled the HBC, you are finished with this guide.

If you already exited MMM, you can load the HackMii_Installer from the Homebrew Channel.

If the HBC is failing to load any apps (just blackscreens), instead launch MMM using the method described in Step 1, then in MMM's main menu, select "App Manager" and then select the HackMii_Installer.

This will launch the HackMii Installer, use it to reinstall your Homebrew Channel.




4) SUPPORT XFLAK
=============

IF MODMII WORKED FOR YOU, PLEASE VOTE IN FAVOUR OF THE PROGRAM HERE (tinyurl.com/ModMiiNow)

DONATIONS CAN OPTIONALLY BE MADE VIA PAYPAL TO XFLAK40@HOTMAIL.COM

CHECK OUT MY TOP CHANNELS HERE (tinyurl.com/topchannels)

CHECK OUT MY CRAZY INTRO VIDEOS HERE (tinyurl.com/crazyintro)

ModMii 4.4.4 HackMii Solutions Guide
Generated on 15/12/2010 - 0:48:40.36
Check for updates at tinyurl.com/ModMiiNow


This Guide was generated using the following parameters:

* Current firmware is 4.2



This software is not for sale. If you paid for this software or a "bundle" you have been scammed.

THIS PACKAGE COMES WITH ABSOLUTELY NO WARRANTY, NEITHER STATED NOR IMPLIED.
NO ONE BUT YOURSELF IS TO BE HELD RESPONSIBLE FOR ANY DAMAGE THIS MAY CAUSE TO YOUR NINTENDO WII CONSOLE!
USE THIS AT YOUR OWN RISK!




IMPORTANT NOTES:

*This guide does NOT require a Wifi connection on your Wii.
*An SD card formatted to FAT(32) required (Best results are with non-SDHC cards, SDHC will only work on 4.0 or above).
*If you get errors during any of the steps reformat your SD card as FAT or FAT32
*Turn off WiiConnect24 and take out all gamecube memory cards/controllers when modding the Wii (unless instructed otherwise).
*If your Wii ever freezes, hold the power button on the Wii for 5 seconds to power it off then try again.
*Don’t ever accept a new Nintendo update without first googling to see if it’s safe. The last update (to 4.3) was released in late June 2010 and is NOT safe to accept. If you accept an official Nintendo update after modding the Wii, you may lose some or all of your modifications.
*Never uninstall a system menu or IOS
*Do not install untested wads/themes without Bootmii or Priiloader installed.
*This custom guide is great start, but Wii modding is always evolving. Check for updates online, and remember, google is your friend.
*If you have questions, a more detailed guide can be found here: https://www.completesoftmodguide.tk




1) LAUNCH Multi-Mod Manager (MMM)
==============================

Start the Homebrew Channel (HBC) and load Multi-Mod Manager (MMM). Once you've loaded MMM, move onto the next step.

If you are missing the HBC or it is failing to load any apps (just blackscreens), you will need to launch MMM using another method.



Run BannerBomb v2 by selecting the SD Card Button on the main system menu screen and choosing yes to load boot.dol/elf
Note: If it doesn't work for you, visit https://bannerbomb.qoid.us/ for more variations of either version of bannerbomb.





2) INSTALL IOS58 USING Multi-Mod Manager (MMM)
===========================================

In Multi-Manager Mod's main menu, Go down to select "WAD Manager".

Now install IOS58v6176.
Navigate to the wad and hit A twice to install the IOS individually.

Be careful not to install any additional wads that may have been previously saved in this folder (they may be safe, but I cannot say for sure).

Make sure the file installed properly.
Only move onto the next step after successfully installing the wad, but do NOT exit MMM.



3) INSTALL THE HOMEBREW CHANNEL (HBC)
==================================

In MMM's main menu, select "App Manager" and then select the HackMii_Installer.
Use the Hackmii Installer to fix/re-install the HBC. If you haven't done so already, you should also install BootMii as Boot2 (if possible).
Once you've successfully reinstalled the HBC, you are finished with this guide.

If you already exited MMM, you can load the HackMii_Installer from the Homebrew Channel.

If the HBC is failing to load any apps (just blackscreens), instead launch MMM using the method described in Step 1, then in MMM's main menu, select "App Manager" and then select the HackMii_Installer.

This will launch the HackMii Installer, use it to reinstall your Homebrew Channel.

After you are done modding your Wii, in order to avoid having your Wii freeze when accessing the SD Card Menu, you should either delete the 'aktn' folder where bannerbomb is saved (SD:\private\wii\title\aktn), or rename the entire 'private' folder.




4) SUPPORT XFLAK
=============

IF MODMII WORKED FOR YOU, PLEASE VOTE IN FAVOUR OF THE PROGRAM HERE (tinyurl.com/ModMiiNow)

DONATIONS CAN OPTIONALLY BE MADE VIA PAYPAL TO XFLAK40@HOTMAIL.COM

CHECK OUT MY TOP CHANNELS HERE (tinyurl.com/topchannels)

CHECK OUT MY CRAZY INTRO VIDEOS HERE (tinyurl.com/crazyintro)

ModMii 4.4.4 USB-Loader Setup Custom Guide
Generated on 15/12/2010 - 0:49:01.09
Check for updates at tinyurl.com/ModMiiNow


This Guide was generated using the following parameters:

* External Hard Drive to be Formatted as FAT32
* Download Configurable USB-Loader
* USB-Loader Settings and config files saved to USB Hard Drive



This software is not for sale. If you paid for this software or a "bundle" you have been scammed.

THIS PACKAGE COMES WITH ABSOLUTELY NO WARRANTY, NEITHER STATED NOR IMPLIED.
NO ONE BUT YOURSELF IS TO BE HELD RESPONSIBLE FOR ANY DAMAGE THIS MAY CAUSE TO YOUR NINTENDO WII CONSOLE!
USE THIS AT YOUR OWN RISK!




IMPORTANT NOTES:
----------------

*cIOS(s) required to use USB-Loaders, if you are missing cIOS(s) run the ModMii Wizard function to softmod your Wii before setting up your USB-Loader and/or external Hard-Drive.
*cIOS249 rev18 or higher required to use Hard Drives Formatted as FAT32 or NTFS (cIOS222 rev4 or higher also works, but you would need to download the 222 version of configurable usb-loader or modify your config.txt file for configurable USB-Loader)
*Not all external hard drive's are compatible with the Wii, for a list of which USB Hard Drive's are compatible, see this webpage: https://wiki.gbatemp.net/wiki/USB_Devices_Compatibility_List
*If you have questions, a more detailed guide can be found here: https://www.completesoftmodguide.tk




1) FORMAT THE HARD DRIVE (if applicable)
=====================================

First check if your drive needs to be formatted by checking the current Format\File-System of the drive.
Open 'My Computer', right-click the external hard drive you want to use, then select 'properties'.
Make note of the Drive Letter of the external hard drive as this will be important later.
If the 'File-System' is already FAT32, you can skip this step.

If you have anything saved on the hard drive, you should back it up now as all the data will be lost once you format it.

Launch WiiBackupManager.exe saved here:
COPY_TO_USB\WiiBackupManager\WiiBackupManager.exe

At the top of the WiiBackupManager window, navigate to: Tools--Format Drives...
Make sure you select the drive letter corresponding to the partition you want to format as FAT32.
Make sure the file system is set at FAT32 and the cluster size is 32KB, then click start.



2) COPY FILES TO HARD DRIVE
========================

Copy everything inside the COPY_TO_USB folder to the root of your FAT32 hard-drive\partition.



3) MANAGE WII BACKUPS USING WII BACKUP MANAGER (OPTIONAL)
======================================================

Launch WiiBackupManager.exe saved here:
COPY_TO_USB\WiiBackupManager\WiiBackupManager.exe

You can use this program to manage/transfer your electronic backups of Wii Games.
It is very simple to use, but a detailed tutorial on using Wii Backup Manager can be found here:
https://www.completesoftmodguide.tk/backup-...-backup-manager

Note: Original Wii Disc's cannot be read/copied by using a computer (unless you have one of the rare LG Drives that is capable of doing so)

To copy ORIGINAL Wii Disc's, insert the disc into your Wii and...
- Launch Configurable USB-Loader, and hit the plus sign '+'.




4) CONFIGURE/CUSTOMIZE CONFIGURABLE USB-LOADER (OPTIONAL)
======================================================

To Configure/Customize your USB-Loader, use the Configurator for Configurable USB-Loader found here:
COPY_TO_USB\usb-loader\CfgLoaderConfigurator.exe

Optional: additional themes can be found here:
https://wii.spiffy360.com/themes.php

* IMPORTANT NOTES ON DEFAULT SETTINGS:
------------------------------------

Two potentially dangerous features have been locked:
1) The ability to remove/delete games
2) the ability to format a hard drive.

To unlock these features, while in the configurable USB-Loader menu, hold '1' for 5 seconds, then enter the password to unlock these features. The password is 'AAAA', you can change the password/settings by using the Configurator for Configurable USB-Loader. Hold '1' again for 5 seconds to lock the USB-Loader again (or it will lock automatically again once you exit the USB-Loader).



5) SUPPORT XFLAK
=============

IF MODMII WORKED FOR YOU, PLEASE VOTE IN FAVOUR OF THE PROGRAM HERE (tinyurl.com/ModMiiNow)

DONATIONS CAN OPTIONALLY BE MADE VIA PAYPAL TO XFLAK40@HOTMAIL.COM

CHECK OUT MY TOP CHANNELS HERE (tinyurl.com/topchannels)

CHECK OUT MY CRAZY INTRO VIDEOS HERE (tinyurl.com/crazyintro)

ModMii 4.4.4 USB-Loader Setup Custom Guide
Generated on 15/12/2010 - 0:49:59.28
Check for updates at tinyurl.com/ModMiiNow


This Guide was generated using the following parameters:

* External Hard Drive to be Formatted as Part FAT32 and Part NTFS
* Download Configurable USB-Loader
* USB-Loader Settings and config files saved to USB Hard Drive



This software is not for sale. If you paid for this software or a "bundle" you have been scammed.

THIS PACKAGE COMES WITH ABSOLUTELY NO WARRANTY, NEITHER STATED NOR IMPLIED.
NO ONE BUT YOURSELF IS TO BE HELD RESPONSIBLE FOR ANY DAMAGE THIS MAY CAUSE TO YOUR NINTENDO WII CONSOLE!
USE THIS AT YOUR OWN RISK!




IMPORTANT NOTES:
----------------

*cIOS(s) required to use USB-Loaders, if you are missing cIOS(s) run the ModMii Wizard function to softmod your Wii before setting up your USB-Loader and/or external Hard-Drive.
*cIOS249 rev18 or higher required to use Hard Drives Formatted as FAT32 or NTFS (cIOS222 rev4 or higher also works, but you would need to download the 222 version of configurable usb-loader or modify your config.txt file for configurable USB-Loader)
*Not all external hard drive's are compatible with the Wii, for a list of which USB Hard Drive's are compatible, see this webpage: https://wiki.gbatemp.net/wiki/USB_Devices_Compatibility_List
*If you have questions, a more detailed guide can be found here: https://www.completesoftmodguide.tk




1) PARTITION AND FORMAT THE HARD DRIVE
===================================

If you have anything saved on the hard drive, you should back it up now as all the data will be lost once you complete this step.

Right-click 'My Computer' and select 'Manage', a new window will open, on left panel click 'Disk Management'.
Right-click the drive you want to partition (make sure you select the right drive!), then select 'Delete Volume...'

On the lower half menu of the window, locate the unallocated space, right-click it, and select 'New Simple Volume...'
Enter the 'volume size' you want your FAT32 partition to be, and click 'Next'.
Choose a Drive letter for this partition, and click 'Next' (Make note of the drive letter, as it will be needed later)
You will likely not be able to change the file system to FAT32 (it will only be an option if the volume size is under 32GB)
If FAT32 isn't an option, select 'Do not format this volume', and click 'Next'
(it doesn't matter if you format the volume, you are going to format it using 'WiiBackup Manager' later on)

On the lower half menu of the window, locate the remaining unallocated space (for the NTFS partition), right-click it, and select 'New Simple Volume....
Click 'Next' (to format the all remaining space on the drive).

Choose a Drive letter for this partition, and click 'Next'.
Ensure the file system is set to NTFS then name the partition/volume,
You may optionally uncheck the 'Perform a quick format' box, click 'Next', then click 'Finish'.


If you managed to format the first partition as FAT32, then you can skip the remainder of this step.

Launch WiiBackupManager.exe saved here:
COPY_TO_USB\WiiBackupManager\WiiBackupManager.exe

At the top of the WiiBackupManager window, navigate to: Tools--Format Drives...
Make sure you select the drive letter corresponding to the partition you want to format as FAT32.
Make sure the file system is set at FAT32 and the cluster size is 32KB, then click start.



2) COPY FILES TO HARD DRIVE
========================

Copy everything inside the COPY_TO_USB folder to the root of your FAT32 hard-drive\partition.



3) MANAGE WII BACKUPS USING WII BACKUP MANAGER (OPTIONAL)
======================================================

Launch WiiBackupManager.exe saved here:
COPY_TO_USB\WiiBackupManager\WiiBackupManager.exe

You can use this program to manage/transfer your electronic backups of Wii Games.
It is very simple to use, but a detailed tutorial on using Wii Backup Manager can be found here:
https://www.completesoftmodguide.tk/backup-...-backup-manager

Note: Original Wii Disc's cannot be read/copied by using a computer (unless you have one of the rare LG Drives that is capable of doing so)

To copy ORIGINAL Wii Disc's, insert the disc into your Wii and...
- Launch Configurable USB-Loader, and hit the plus sign '+'.

Warning: Ripping to NTFS is VERY unstable, it is highly recommended to only add games to an NTFS hard drive using your computer.



4) CONFIGURE/CUSTOMIZE CONFIGURABLE USB-LOADER (OPTIONAL)
======================================================

To Configure/Customize your USB-Loader, use the Configurator for Configurable USB-Loader found here:
COPY_TO_USB\usb-loader\CfgLoaderConfigurator.exe

Optional: additional themes can be found here:
https://wii.spiffy360.com/themes.php

* IMPORTANT NOTES ON DEFAULT SETTINGS:
------------------------------------

Two potentially dangerous features have been locked:
1) The ability to remove/delete games
2) the ability to format a hard drive.

To unlock these features, while in the configurable USB-Loader menu, hold '1' for 5 seconds, then enter the password to unlock these features. The password is 'AAAA', you can change the password/settings by using the Configurator for Configurable USB-Loader. Hold '1' again for 5 seconds to lock the USB-Loader again (or it will lock automatically again once you exit the USB-Loader).



5) SUPPORT XFLAK
=============

IF MODMII WORKED FOR YOU, PLEASE VOTE IN FAVOUR OF THE PROGRAM HERE (tinyurl.com/ModMiiNow)

DONATIONS CAN OPTIONALLY BE MADE VIA PAYPAL TO XFLAK40@HOTMAIL.COM

CHECK OUT MY TOP CHANNELS HERE (tinyurl.com/topchannels)

CHECK OUT MY CRAZY INTRO VIDEOS HERE (tinyurl.com/crazyintro)

Fixed bug where ModMii would crash when using the ModMii Wizard if downloading WiiFlow.
Fixed bug where you could not go return to the page prior to inputting your serial number when building an emulated nand for uneek2o or uneek2o+di (bug did not effect Abstinence Wizard).
Reverted WiiFlow on ModMii's Download Page 2 back to r304 at FIX94's request. When his mod if WiiFlow is more stable it will be added back to ModMii as an autoupdating download.

instead they are custom html files viewable in your internet browser. Although none of the softmodding steps actually changed, the guides were rebuilt from the ground up. They now include images, videos, credits, a print button and more. DeadlyFoez played a key role in this update not only by helping come up with the idea but also creating the template for ModMii's custom guides and recording almost all of the videos and images they use. Within 1.5 weeks since our initial conversation we were able to collaborate and bring the idea to life in time to release it for Christmas. Working together on this was a truly rewarding and fun experience for both of us and we hope it brings a little "Team Your Mom" XMAS cheer to you this year.

When accessing the credits from the main menu using "CR" it will open a new browser tab instead of displaying the credits in the main ModMii Window.

ModMii Wizard Guides for already modified Wii's to update the HBC or Bootmii no longer include exploits. Instead, if users cannot load the hackmii installer from the HBC, BootMii or a forwarder channel they are instructed to use ModMii's HackMii Solutions Guide instead.

Added videos to the ModMii Wizard to help users determine their system menu version and Homebrew channel version.

When ModMii opens the Letterbomb webpage it also opens a separate panel with an instructional video on finding your MAC address and downloading Letterbomb.

Changed how System Menu Theme youtube videos are previewed.

Added drag and drop support for ModMii's sysCheck Updater. Now when users drag and drop their sysCheck logs onto ModMii.exe (or shortcut) ModMii will immediately analyze the log and display a list of required downloads in order to update the softmod.

Fixed d2x cIOS v7-final detection when using ModMii's sysCheck Updater feature.

Relaxed serial number length restrictions in emulated NAND builder so US users can use their real serial even if it's only 11 digits when building non-US NANDs.

Updated md5 for re-uploaded nSwitch channel (v4.8.2.1 partial update).

ModMii: Now so sexy you'll need a fresh pair of pants. Other minor changes.

This is an example of how to code a spoiler